Leader Accessories 10 Colors 3 Bow 4 Bow Bimini Top Cover for Boat Includes 4 Straps 2 Rear Support Poles Mounting Hardwares Storage Boot with 1" Aluminum Frame

Many of the reviews complained about the instructions. I thought they were fine. It took me about 30 minutes to assemble the top. I am installing on my pontoon boat. It is a replacement top. The poles and hardware are not as strong as what I had on the boat. I had 1 1/4 square metal pole and metal hardware. I am keeping the metal hardware but can't use the poles because the new top cross pieces are sewn in and my old top had zippers. Also, I had to come up with a new configuration for the anchor light. My old one had a hole in the top on the rear pole and the boot for the anchor light. But the packaging and quality of the top seem to be of good quality. I received the shipment a day early. It was worth the price.

I bought this to try it out for fit and finish and plan to purchase a fully stainless steel and top end canvas next year. It turns out - this is a pretty darn good bimini for 200 bucks. The material seems to be fine and thus far over this very hot and sunny summer it has not shown signs of fading. It was pretty easy to install. I wound up cutting the stabilizer bars to fit on my stern rail rather than fastening them to the deck. I had to purchase additional fittings for this purpose It looks sharp, stores easily, and the boot fits like a glove. Nice bimini for cheap!

Good Quality, was a little tall for my boat making it look a little silly. I removed the rivets on the primary tower, cut it down 10" and riveted back together; looks a lot sleeker now, still fits the cover and we're happy with the product.

It went together quick. It is made as good as most others. I would buy it again. It works very well. Good value. Nice product

I’ve only installed it today but it looks great and the install maybe took 2 hours(including the many breaks we took). I had my cousin come out and help me, I definitely recommend having a buddy to help you position it. Some people said the hardware was cheap but I pre-drilling holes and tightened them by hand and they worked fine. However, I didn’t use the provided screwdriver. So I’d also recommend using your own screwdriver but the provided one is still a keeper. It’ll definitely be living in my boats spare tool bag. The directions allow you to mount it with 2 straps instead of 4 and that’s how I intended to use it. After assembly it didn’t seem super sturdy and I don't trust it standing up while driving. Then again I’m new to boating, maybe you’re supposed to fold it all the way down when driving. That’s what I’ll be doing. Overall I’m very happy with it. The installation went smooth, it looks nice, and I’m ready to test it out. I’ll make an update my if any issues occur.

I purchased this top for my 1977 pontoon I am re-doing. I wanted something functional without breaking the bank because I want to be under $1k on the entire boat with refurbishment. This top fit perfectly on the boat. It is not a one person job to mount this though, plan on having at least one person with you. The quality of the top is quite good. The directions a very unclear and I found myself looking at the pictures several times to figure it all out. The directions do mention mounting the hardware based on the measurements included. Mine had no measurements included, so we had to hold it up and mark on the rails where it looked right. After doing that, we were able to get it mounted successfully. The top seems to be sturdy for what it is. Included is a zip up cover to keep the top in so the wind does not take it when towing the boat. I try to keep my speed at 40mph while towing, I do see the folded up top shaking quite a bit, 35mph might be better... Definitely worth the money for this top.

I needed a top for hot summer days and rain when fishing. Looking around of course you can spend 5 times what this top cost which I did not want to do since it would just be getting beat up on a fishing boat. I decided to give this a try and worse case just replace the fabric if it was bad since the poles are 1" poles which all the higher end tops use. At this point I do not see where reviews that are saying the fabric is thin are comparing them to. I have had several boats with factory tops and they are all the same thickness as this material. The Cabela's tops use the same material but cost twice as much. I sat in a down pour under this top the day after installing it and while not completely water proof it sure let in less drops than my last factory $500 bimini top on my last boat coated in Nikwax. When I say down pour I am talking about 2 inches of rain in an hour and a half. Very impressed with that. As for sun the top works as well as any other I have been under for shade. Installation was not too bad. It took me about 30 minutes start to finish. I spent more time running into the house to look at the top on the companies website on the computer to get it put together correctly. The instructions didn't make much sense to be honest but looking at the picture online to get the poles installed correctly was easy enough. The drop support line connections on the poles and the connection for the poles to the boat is plastic. I figure if they ever break I can replace the pole connection with stainless ones and simply tie the connecting lines to the poles if need be. With that said it does not look like either of these will be an issue as seem pretty durable. Fastest I have been with this up was 40 mpg on my fishfinder's gps. The top looked to handle it just fine. All around I have been very pleased with this top.

Put this on our boat after we redid the whole thing. Definitely a great addition. Good quality, faded a little after 2 years but still good. I would recommend getting this for the boat or pontoon.

This bimany is well made, is easy to assemble and provides the shade we need while fishing in the hot sun

作りもしっかりしており 組み立ても説明書、言葉不足ですが 写真見て何となく進めると 15分ほどで出来上がりました。 オーニングの布もしっかりとして 4.5回使用してますが 問題はないです。 色アセが 年月で進んでいくとは 思いますがオーニングの布だけ 注文出来れば完璧です。

This was used on my 16ft aluminum boat- perfect fit - it is always a pleasure dealing with Amazon.

ホワイトが選択できるので、購入したが、アルミのビミニトップ としては平均以上の質だと思います。カバーも同色でついているのがありがたい。ただ、取り付けは素人では、ちょっと苦労しそうです。ベースの傾きとか、ぴったり合わせないと難しいので、でも、なんとかなるでしょう。耐久性はこれからですが、ともかくアルミなので軽さが良いです。

Easy to install, looks great, fast delivery, will be heading out soon to try on the water.